This user’s guide provides instructions on how to install the DSL-GT Wireless ADSL Router and use it to .. address. NAT address mapping can also be used to link two IP domains via a LAN-to-LAN connection. IEEE d compliant. Security Advisement (B01 BETA01) Upgrade Instructions; 12/07/16 Quick Install Guide () Upgrade Instructions; 07/01/15; Download; Release Notes. View and Download D-Link DSL-GT user manual online. Wireless ADSL Router. DSL-GT Wireless Router pdf manual download.
Please check the D-Link support site for firmware updates at D-Link Technical support website of your country. Connect the antennas to the antenna posts. Warranty And Registration D-Link offices is provided at the back of this manual, together with a copy of the Registration Card. Type in IP settings as follows, IP address: You may click Back during the Setup procedure to return to the previous screen in the Setup Wizard, or Exit to exit the Setup Wizard at any time during the procedure.
Now that you have your router’s Internal IP Address we are ready to login to it. Forgot Password to Dlink DSL-GT Router If your Internet Service Provider supplied you with your router then you might want to try giving them a call and see if they either know what your router’s username and password are, or maybe they can reset it for you.
A file Download dialogue box will appear questioning the user where to save the files on your computer. The WAN settings can be referred to as the Public settings. Firmware Once found, click Apply to initiate the transfer. Data rates up to 24 Mbps for downstream and 1Mbps for upstream ” This must first be disabled in the Wireless menu located in the Home directory.
Device Info The device info window, located under the Status tab will allow users to view information regarding the settings of the Router, both on the LAN side and WAN side of the connection.
The user may choose any combination of these to use for firewalling.
Remote Log window Select the Log Level from the pull-down menu. This is considered your internal network. Introduction Kbps upstream, depending on local telephone line conditions. The previous figure illustrates how the net and host portions of the IP address differ among the three classes.
Click twice to confirm and save your changes, and then close the Control Panel. The modem has been pre- configured for 8 PVCs. This will immediately disable the wireless access point, it is not necessary to restart the access point to make this change. Typically the IP address assigned has a long lease time, so it will likely be the same address each time the Router requests an IP address. Subnet Mask Displays the Subnet Mask of the device.
It looks like this:. Many users will be able to use the default settings. This menu is also be used to enable and configure use of multiple SSIDs.
You should try other Dlink passwords. Click Apply to set these firewall rules to the routers memory. When a wireless access point is present, it becomes a base station for the WLAN nodes in its broadcast range. If you did not see your router’s ip address in the list above.
When deciding where to put the Router, the user must take into account the fact that it is connected to these two networks with three types of media. Comments to this Manuals Your Name. Then press the Enter key on your keyboard. See your ISP for further information. It looks like this: To configure multiple SSID: If a Registration Card for the product in question has not been returned to a D-Link office, then a proof of purchase such as a copy of the dated purchase invoice must be provided when requesting warranty service.
Dsl-v604t the Network and Dial-up Connections window, right-click on the Network icon, then select Properties.
Computer to Router Connection Figure 2- 1. If this is your first time setting up a wireless network device, read and consider the points listed below. Enter text from picture: Routing window The user may configure the manaul fields for Static routing on the router: Leave this set at the default value 1 the first time the Router is set up.
Dlink DSL-G604T User Manual
Choose the appropriate setting and click Next to go on to Step 3. When setting up the Router, you must make sure it has a valid IP address. Displays the PVC currently in use on the Router. Setting the Time Zone In Step 2, you must choose the time zone that best corresponds to the area you are living in by using the pull down menu.
Once the WAN connection is functioning properly you may continue to make changes to the Router configuration including the IP settings. PPP window The window above displays the following information. UPnP UPnP supports zero-configuration xsl-g604t and automatic discovery for many types of networked devices. Remember that any wireless device using the access point must have the same SSID and use the same channel.
The levels available are: In the example above, available addresses range from
Privacy & Cookies Policy
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.